Designers Actually Love This Cheap Fence Idea (2024)

FAQs

Designers Actually Love This Cheap Fence Idea? ›

Split-rail fences are less expensive than full-plank fences because of their sparse appearance, which uses less material. Ranch houses and farmhouses look wonderful with this simple fence design.

If durability matters the most, metal is the best option. Wood fences are timeless and stylish, but they're also highly prone to wear due to weather and age, and they can require a good amount of maintenance. The least expensive type of fencing is chicken or hog wire.

PVC fencing. The cheapest way to create a fence for your home is by getting one made from PVC. Such fences substitute wooden pickets and stakes to offer your protection from the outside world. PVC sleeves improve the stability of wooden posts used as a fence, reducing the cost of material and the labor used.

Using a garden border is a well-known and cheap alternative to fencing. Not only will a garden border hinder entry to unwanted animals, but it can also protect the development of young plants. Moreover, having a garden border is cheaper than other forms of fencing and may generate a natural look for your property.

Premium Vinyl fencing will outlast the wood fencing by years, requires no maintenance upkeep, is impervious to insects, and over the long run, VINYL IS LESS EXPENSIVE THAN WOOD! Not only will it be less expensive than wood over 10 years, but it will also have about 6-1/2 times the Return On Investment over wood.

On average, a board-and-stringer fence costs about $175 for each 8-foot-long by 6-foot-high section. To cover the same area, a panel fence will cost $230 (or about 30 percent more). If you can find a good source of free pallets, a DIY wood pallet fence can be one of the cheapest options for a privacy fence.

If your garden has already been started, wait until fall or winter to install a fence around your backyard garden. There will be less competition for time, and the project will likely come in under budget.

When it comes to cost, pre-made feather edge or lap fence panels are usually the cheaper option. This is because most fence panel manufacturers have the necessary setup and equipment to produce large amounts of fencing on a large scale.

A fence can increase value to your home by adding curb appeal if it enhances the visual appeal or some other aspect of your home, such as adding privacy. Significantly improving security may also add more value where break-ins are common.

What is the most expensive part of a fence? ›

Corner posts tend to be more expensive than the material cost per foot; the more corner posts are needed, the more expensive the project will be. If purchasing fence materials that are taller than 6 feet, expect to add an additional 25% of the material cost to the total budget.

In summary: premade fence panels, in most cases, are cheaper and requires less installation time. However, it is best suited for yards without hills or slopes.

When it comes to the cost of fences and walls, there can be quite a big difference. Walls tend to be a much more expensive option, although opting for standard engineered bricks, or reusing materials you have hanging around on site, and constructing the wall on a DIY basis will most certainly cut costs.

Fencing is also expensive. Beyond coaching, equipment and club fees, fencers must often travel like a tennis pro to compete in the top tournaments — Bucharest, Cairo, Istanbul. Parents, for the most part, foot the bill, which can reach tens of thousands of dollars a year.

Wood fencing, without a doubt, has the cheaper upfront pricing. According to HomeAdvisor, a wood fence costs $12 per linear foot on average. On the other hand, a vinyl fence costs about $17 per linear foot. The cost of materials for your unique project may vary based on style, terrain, and other factors.

In summary: premade fence panels, in most cases, are cheaper and requires less installation time. However, it is best suited for yards without hills or slopes.